SM-40 Cans Lids Testing Instrument - Easy-open Ends Score Residue Meter

Item No.: YSM-40-4369

SM-40 score residue meter is a microscope testing equipment, used to measure the score depth of easy-open can lids ends - the remaining amount of score.

Product parameters
Product Name:	Cans Lids Testing Instrument - Easy-open Ends Score Residue Meter
Model Number:	SM-40
Brand:	CYI-C
Minimum Order Quantity:	1 easy-open ends (lid) score residue meter
Price:	The price is determined according to the parameters and quantity of the order.
Supply Ability:	20 easy-open lid score residue meter per month
Place of Origin:	China

INQUIRY

Description

SM-40 score residue meter is a microscope testing equipment, used to measure the score depth of easy-open can lids ends - the remaining amount of the notch (score).

Measuring Method of SM-40 Easy-open Ends Score Residue Meter
1. Align the objective lens of the microscope with the nether measuring needle. Adjust the focal length of the objective lens until the image of the nether measuring needle tip is the clearest. Figure 1.
Figure 1 of SM-40 Easy-open Ends Score Residue Meter

Figure 1 of SM-40 Easy-open Ends Score Residue Meter

2. Press the "Record" button to record the value of this focal length. This value is the "zero value". Figure 2
Figure 2 of SM-40 Easy-open Ends Score Residue Meter

Figure 2 of SM-40 Easy-open Ends Score Residue Meter

3. Place the easy-open lid on the measuring table. ThepPull ring (tab) and the score upwards. The score to be detected are placed in the area of the objective lens and the nether measuring needle. Adjust the focal length of the objective lens until the easy-open lid image appears on the screen. At this time, the objective lens and the nether measuring needle are not necessarily aligned with the score. Figure 3.
Figure 3 of SM-40 Easy-open Ends Score Residue Meter

Figure 3 of SM-40 Easy-open Ends Score Residue Meter

4. Adjust the horizontal movement knob of the measuring table so that the notch (score) of the easy-opening lid (end) is aligned with the objective lens and the nether measuring needle. Figure 4.
Figure 4 of SM-40 Easy-open Ends Score Residue Meter

Figure 4 of SM-40 Easy-open Ends Score Residue Meter

5. Adjust the focal length of the objective lens until the bottom of the notch (score) is clear.
6. Press the "Record" button to record the value of this focal length. This value is the bottom focal length "A" of the notch.
7. Calculate the remaining amount of the notch (score) on the easy opening lid. The tip of the nether measuring needle is a supporting point of the lid to ensure good contact with the bottom surface of the lid. The “zero value” of the focal length of the tip of the nether measuring needle is also the “zero value” of the easy-open lid notch, denoted by O.
Remaining amount of notch = A – O = A That is:
Easy-open Ends Score Residue = A – O = A

Features of SM-40 Easy-open Lids Score Residue Meter
● Adopted the fine optical components, ensured the high definition of images and data accuracy.
● It is suitable for all kinds of lids. The maximum diameter of the lid is 110mm, which can be larger.
● Lens working distance reaches 8.2mm, (working distance means the distance between the lens and object when focusing gets a clear image), well solved the biggish difference between lid score position and lid fringe of EO lids, applicable for the score measurement of various kinds of can lids, such as RP, SOT, EO, etc.
● The advanced single lens reflex design, able to adjust the magnification continuously, convenience for the observation.
● Fine micrometer and display, reaches 1 µm resolution, ensured the result accuracy.
● Professional measuring software, with database management system, convenient for generating reports, data statistic and image storage.
● Screen cross line function. Ensured the calibration point and measurement point superposed strictly.
● Calibration block. Users can do the calibration at any time.
● The lifting measurement support, eliminate the deviation caused by the slope of sample ends.

Parameter of SM-40 Easy-open Ends Score Residue Meter
● Sample types: RP, SOT, EO
● Measure range: 0-10mm
● Resolution: 1μm（0.001mm）
● Reproducibility: 2μm (0.002mm)
● Lens working distance: 8.2mm
● Magnification: 1000 X
● Dimensions: 250 x 300m x 600 mm

Configuration of SM-40 Scribe and Score Detector
1. SM-40 Microscope
2. Data output module
3. Control Box
4. Measurement software
5. Calibration block
6. Calibration Clip
Optional:
7. Computer

-------------------------------------------
Related Products
If you need other types of products, please click on the blue font below, you can browse another page to see the related introduction.
1. Often Used Food Can Lid Testing Instruments and Equipment: include testing instruments for the structure and compressive strength of food can lids and anticorrosive coating layers.
2. PT-40 Pop and Tear Tester Gauge for Easy Open Ends Lids: is used to measure the pulling force required to open the lid, has calibration function and is easy to operate.
3. LT-20 Buckle and Leak Tester for Easy Open Ends Lids: Has two test functions: the easy open ends compressive strength test and leak test, round lids and irregular shaped lids.
4. CE-1A Buckle Tester for Can and Easy Open End Lid: can test the buckle of ends and the bottom of cans, and "missile" of easy open ends, round lids and irregular shaped lids.
5. SM-30 Cans Lids Testing Instrument - Easy-open Ends Score Residue Laser Meter: is a microscope testing equipment, uses laser precise measurement technology to measure the score residue of can easy-open ends. The measurement data is accurate, reliable, and reproducible.
6. MJ-1C Cans Lids Testing Instrument - Easy Open Ends Rivet Meter: is a microscope testing equipment, used to measure the rivet structure and size of the pull ring (tab score) in the can easy-open ends.
7. LS-10 Cans Lids Precise Cutting Machine - Easy Open Ends Low Speed Saw: is used to cut the rivet of easy-open end to observe whether the structure of rivet meets the quality requirements.
8. Necessary Food Cans and Lid Coating Quality Testing Equipment: These instruments include testing equipment for the anticorrosive coating layer of food cans and lids and metal sheets.
9. CE-10 Automatic Digital Enamel Rater for Metal Can Lids: CE-10 digital enamel rater is used to test the degree of perforation of the anticorrosive coating layer in the can lid, is fully automated testing equipment.
10. ER-10 Ten Stations Digital Enamel Rater for Can Metal Lids: is used to test the degree of perforation of the anticorrosive coating layer in can lid, can test 10 metal lids at the same time. It is an efficient can lid testing equipment.
11. ER-4 Multifunctional Digital Enamel Rater for Metal Cans and Lids: is equipment for testing whether there are perforations in the anti-corrosion coating layer of metal cans and lids. Various containers, lids and tinplate anticorrosive coatings can be inspected after changing a variety of testing molds and brackets.
12. ER-2 Multi-station Digital Enamel Rater for Metal Cans and Lids: is equipment for testing whether there are perforations in the coating layer of metal cans and lids, it can inspect two containers at the same time. The cans and lids can be round or irregularly shaped.
13. TG-3 Coating Thickness Gauge for Metal Sheet or Cans or Lids: uses electromagnetic induction to measure the coating thickness on metal sheets, cans or lids. The measurement value of this instrument is calculated with the coating weight per unit area (g/m²). When equipped with “Hover Probe”, the gauge can measure the coating thickness of metal sheets. When equipped with can body testing clamp, it can test the coating thickness of can body. Use a standard calibration coating plate (sample with known weight, g/m²) to calibrate the gauge.
Note
•If the products you need are not listed on this website, you can also Contact Us, you maybe get a satisfactory answer.
•If the equipment performances and parameters required by the customer are beyond the scope of this introduction, we can customize it specially.
•The Product descriptions may be modified at any time without notice.
•The final performance and parameters of the product are determined by the contract signed by the customer at the time of order.
-------------------------------------------