ER-10 Ten Stations Digital Enamel Rater for Can Metal Lids

Item No.: YER-10-4374

ER-10 digital enamel rater is used to test the degree of perforation of the anticorrosive coating layer in can lid, can test 10 metal lids at the same time.

Product parameters
Product Name:	10 Stations Digital Enamel Rater for Can Metal Lids
Model Number:	ER-10
Brand:	C.N.
Minimum Order Quantity:	1 ten stations digital enamel rater
Price:	The price is determined according to the parameters and quantity of the order.
Supply Ability:	20 ten stations digital enamel raters per month
Place of Origin:	China

INQUIRY

Description

ER-10 digital enamel rater is used to test the degree of perforation of the anticorrosive coating layer in the can lid. The digital enamel rater can test 10 metal can lids at the same time. It is an efficient can lid testing equipment.

The working principle of ER-10 digital enamel rater
Take the round metal lid as an example, place the can lid on the bottom end of a cylinder (or tube). Form a container. Place electrolyte (for example: sodium chloride solution, brine) in the container. Salt water is used as one electrode, and the outer surface of the metal cover is used as the other electrode, power ups. If the paint layer of the can lid is perforated, the current is very large. The degree of perforation of the paint layer of the can lid is judged by measuring the current value.

ER-10 The Working Process of ER-10 Ten Stations Digital Enamel Rater
Put the electrolyte (brine) into 10 containers. Put a metal lid on each container. Lower the door above the instrument to clamp the lid on the container. Turn the handle of the instrument to turn the ten test containers 180°. At this time, the lid is on the bottom of the container. The electrolyte in the container can be sufficiently immersed on the coating layer on the inner surface of the lid. After turning on the power, 4 seconds later, the current value (mA) of each container can be measured. At the same time display the maximum current value and the average current value. If the measurement fails due to poor contact, the instrument will prompt and alarm. Measured data can be transmitted to the computer through the interface. The ER-10 ten stations digital enamel rater is an important can lid testing equipment.
If two ER-10 digital enamel raters are connected, 20 can lids can be measured simultaneously. The diameter of the can lid is 50-99mm.

Features of ER-10 Ten Stations Digital Enamel Rater
• High efficiency, efficiency increased by 66%.
• It only takes 1 minute to replace the O-ring when changing the cap type.
• No vacuum pump is required.
• The screen displays the current value of each cover at the same time.
• Data can be exported to the database.
• Automatically record data.
• Inductive control button, very durable.

Parameters of ER-10 Ten Stations Digital Enamel Rater
• Equipment Name: Ten Stations Digital Enamel Rater
• Equipment Model: ER-10
• Measuring Voltage:   6.3V
• Measuring Range:   0-300mA
• Graduation:   0.01mA
• Accuracy:   ± 2%
• Data Interface:   RS232

-------------------------------------------
Related Products
If you need other types of products, please click on the blue font below, you can browse another page to see the related introduction.
1. Necessary Food Cans and Lid Coating Quality Testing Equipment: These instruments include testing equipment for the anticorrosive coating layer of food cans and lids and metal sheets.
2. RT-1 Coating Scratch Resistance Tester: uses a hemispherical tipped needle or other abrasion tool to controllably scrape the paint coating and detect the degree of scratching of the coating. With this test of the instrument, the adhesion, hardness and scratch resistance of the paint coating of the plate used to manufacture the food container can be judged.
3. CE-10 Automatic Digital Enamel Rater for Metal Can Lids: CE-10 digital enamel rater is used to test the degree of perforation of the anticorrosive coating layer in the can lid, is fully automated testing equipment.
4. ER-4 Multifunctional Digital Enamel Rater for Metal Cans and Lids: is equipment for testing whether there are perforations in the anti-corrosion coating layer of metal cans and lids. Various containers, lids and tinplate anticorrosive coatings can be inspected after changing a variety of testing molds and brackets.
5. ER-2 Multi-station Digital Enamel Rater for Metal Cans and Lids: is equipment for testing whether there are perforations in the coating layer of metal cans and lids, it can inspect two containers at the same time. The cans and lids can be round or irregularly shaped.
6. TG-3 Coating Thickness Gauge for Metal Sheet or Cans or Lids: uses electromagnetic induction to measure the coating thickness on metal sheets, cans or lids. The measurement value of this instrument is calculated with the coating weight per unit area (g/m2). When equipped with “Hover Probe”, the gauge can measure the coating thickness of metal sheets. When equipped with can body testing clamp, it can test the coating thickness of can body. Use a standard calibration coating plate (sample with known weight, g/m2) to calibrate the gauge.
7. Often Used Food Can Lid Testing Instruments and Equipment: include testing instruments for the structure and compressive strength of food can lids and anticorrosive coating layers.
8. SCP-24 Seamer - Lab Cans Double Seam Sealer: can automatically seal the can by pressing the lifting handle. It is a cans small seamer necessary for canning laboratory.
9. SCO-1 Non-destructive Double Seam Sanitary Cans Opener: only opens the middle portion of the can lid and does not damage the double seam, is necessary equipment for food can testing.
10. ER-4C Anticorrosive Coating Digital Enamel Rater for Tinplate: is equipment for testing whether there are perforations in the anticorrosive coating layer of tinplate used for making food cans or lids.
Note
•If the products you need are not listed on this website, you can also Contact Us, you maybe get a satisfactory answer.
•If the equipment performances and parameters required by the customer are beyond the scope of this introduction, we can customize it specially.
•The Product descriptions may be modified at any time without notice.
•The final performance and parameters of the product are determined by the contract signed by the customer at the time of order.
-------------------------------------------