Necessary Food Cans and Lid Coating Quality Testing Equipment

Item No.: YCLS-4392

These instruments include testing equipment for the anticorrosive coating layer of food cans and lids and metal sheets.

Product parameters
Product Name:	Necessary Food Cans and Lids Coating Quality Testing Equipment
Brand:	FOODEYES
Minimum Order Quantity:	1 coating testing equipment
Price:	The price is determined according to the parameters and quantity of the order.
Supply Ability:	20 coating testing equipment per month
Place of Origin:	China

INQUIRY

Description

These instruments include testing equipment for the anticorrosive coating layer of food cans and lids and metal sheets.

1. The necessity of testing the anticorrosive coating layer of food cans and lids and metal sheets
The prevention of corrosion of food metal containers is one of the important measures for the quality control of canned products. We should pay more attention to the quality problem of "concentrated corrosion". The term "concentrated corrosion" means that once a "metal exposure point" appears on a food metal container with an anticorrosive coating layer, it will be corroded by water-containing food faster than a food metal container without an anticorrosive coating layer. The following quality problems may occur：
(1) Metal ions and other can wall substances enter the food, which will deteriorate the color, aroma and taste of the food.
(2) Metal ions and other can wall substances enter the food, produce gas in the can, and reduce the vacuum.
(3) A few months later, the food metal container was corroded at the "metal exposed point" and caused perforation. At this time, the problematic product has appeared on the market, which is very dangerous.
Therefore, the application of food cans and lid coating quality testing equipment is a must.

2. Commonly used food cans and lids and metal sheets coating quality testing equipment
(1) RT-1 Coating Scratch Resistance Tester: uses a hemispherical tipped needle or other abrasion tool to controllably scrape the paint coating and detect the degree of scratching of the coating. With this test of the instrument, the adhesion, hardness and scratch resistance of the paint coating of the plate used to manufacture the food container can be judged.
(2) CE-10 Automatic Digital Enamel Rater for Metal Can Lids: is used to test the degree of perforation of the anticorrosive coating layer in the can lid, is fully automated testing equipment.
(3) ER-10 Ten Stations Digital Enamel Rater for Can Metal Lids: is used to test the degree of perforation of the anticorrosive coating layer in can lid, can test 10 metal lids at the same time. It is an efficient can lid testing equipment.
(4) ER-4 Multifunctional Digital Enamel Rater for Metal Cans and Lids: is equipment for testing whether there are perforations in the anti-corrosion coating layer of metal cans and lids. Various containers, lids and tinplate anticorrosive coatings can be inspected after changing a variety of testing molds and brackets.
(5) ER-2 Multi-station Digital Enamel Rater for Metal Cans and Lids: is equipment for testing whether there are perforations in the coating layer of metal cans and lids, it can inspect two containers at the same time. The cans and lids can be round or irregularly shaped.
(6) TG-3 Coating Thickness Gauge for Metal Sheet or Cans or Lids: uses electromagnetic induction to measure the coating thickness on metal sheets, cans or lids. The measurement value of this instrument is calculated with the coating weight per unit area (g/m²). When equipped with “Hover Probe”, the gauge can measure the coating thickness of metal sheets. When equipped with can body testing clamp, it can test the coating thickness of can body. Use a standard calibration coating plate (sample with known weight, g/m²) to calibrate the gauge.
(7) ER-4C Anticorrosive Coating Digital Enamel Rater for Tinplate: is equipment for testing whether there are perforations in the anticorrosive coating layer of tinplate used for making food cans or lids.

-------------------------------------------
Related Products
If you need other types of products, please click on the blue font below, you can browse another page to see the related introduction.
1. Often Used Food Can Lid Testing Instruments and Equipment: include testing instruments for the structure and compressive strength of food can lids and anticorrosive coating layers.
2. YGTQ-1 Can Double Seam Inspection System: is a testing instrument for anatomic double seam.
3. YGTQ-2 Can Double Seam Inspection System: is a testing instrument for anatomic double seam.
4. GS-5 Online Can Double Seam Inspection System: uses a non-destructive method to measure the structure of the cans double seam. It can be automatically sampling and inspecting the quality of double seam on the seaming production line.
5. YGTQ-3 Non-destructive Can Double Seam Inspection System: uses an X-ray scanning method to measure the can seam without destroying the double seam of the can.
6. VG-1A 3-piece Can Weld Seam Inspection Tester System: inspects the quality of longitudinal weld seam of 3-piece can, include the overlap length and thickness, bonding strength and continuity of the can.
7. SCP-24 Seamer - Lab Cans Double Seam Sealer: can automatically seal the can by pressing the lifting handle. It is a cans small seamer necessary for canning laboratory.
8. SCO-1 Non-destructive Double Seam Sanitary Cans Opener: only opens the middle portion of the can lid and does not damage the double seam, is necessary equipment for food can testing.
Note
•If the products you need are not listed on this website, you can also Contact Us, you maybe get a satisfactory answer.
•If the equipment performances and parameters required by the customer are beyond the scope of this introduction, we can customize it specially.
•The Product descriptions may be modified at any time without notice.
•The final performance and parameters of the product are determined by the contract signed by the customer at the time of order.
-------------------------------------------