VG-1A 3-piece Can Weld Seam Inspection Tester System

Item No.: YVG-1A-4383

This inspection tester system inspects the quality of longitudinal weld seam of 3-piece can, include the overlap length and thickness, bonding strength and continuity of the can.

Product parameters
Product Name:	3-piece Can Weld Seam Inspection Tester System
Model Number:	VG-1A
Brand:	FOOD EYES
Minimum Order Quantity:	1 set of 3-piece can weld seam inspection tester system
Price:	The price is determined according to the parameters and quantity of the order.
Supply Ability:	15 sets of 3-piece can weld seam inspection tester system per month
Place of Origin:	China

INQUIRY

Description

This inspection tester system inspects the quality of the longitudinal weld seam of the 3-piece can. These inspections include the overlap length and thickness, bonding strength and continuity of the 3-piece can weld seam.

VG-1A 3-piece can welding seam inspection tester system consists of a photosensitive microscope, computer, inspection software, calibration gauge block, WP-10 Longitudinal Weld Seam Inspection Tester for 3-piece Can, tinplate scissor for 2 or 3-piece can inspection, combination plier for 2 or 3-piece can inspection, steel files for 2 or 3-piece can inspection. It is important testing equipment for 3-piece can in the food industry.

Working Process of VG-1A 3-piece Can Weld Seam Inspection Tester System
1. Inspection of overlap length and thickness of can weld seam
Use tinplate scissor to cut the can weld seam transversely. And use a steel file to remove burrs on the cut. Let the can cut weld seam to be inspected face the lens of the photosensitive microscope. At this point, you can observe, inspect and analyze the images of the 3-piece can weld seam. This method can accurately measure the overlap length and thickness of the weld.
Image of the can weld seam cut transversely

Image of the can weld seam cut transversely-3-piece Can Weld Seam Inspection Tester System

2. Inspection of the can weld seam continuity
Use a combination plier to tear the longitudinal weld seam of the 3-pieces can. The weld seam strip after tearing should be intact and not broken. This method can check the continuity of the weld and indirectly determine the bonding strength of the weld.

3. Inspection of the bonding strength of the can weld seam
Use WP-10 can weld seam tester to check. Place the empty can on the fixture. Align the steel ball on the tester cylinder with the inner end of the weld seam. The steel ball exerts an outward pushing force on the weld seam and slides from one end of the weld to the other. During the testing process, the entire weld is subjected to outward tearing force from the steel ball. In this way, the tester can detect the weld strength and weld seam continuity of the 3-piece can.

VG-1A 3-piece can weld seam inspection tester system must periodically use the "calibration gauge block" to verify the accuracy of the system's measurement.

Features and Parameters of VG-1A 3-piece Can Weld Seam Inspection Tester System
• Comprehensive and diverse testing items.
• Convenient and accurate analysis.
• Automatic calculation and storage of inspection data and image data.
• Qualified standard data can be set. When the measured data does not meet the set standard, there will be prompts or warnings.
• Data can be stored as Excel files.
• Resolution of the microscope: 0.001mm.
• Accuracy of the microscope: 0.01mm.
• Magnification times of the microscope: 60X or 100X.

-------------------------------------------
Reference article
Canned Preservation Principle (3) - 3-piece Can Body Welding machine
-------------------------------------------
Related Products
If you need other types of products, please click on the blue font below, you can browse another page to see the related introduction.
1. CQM-50 Automatic 3-piece Can Body Welding Machine: is used for side seam welding of can body.
2. HJD-35 Automatic 3-piece Big Can Body Welding Machine: is used for side seam welding of big can body.
3. CLT-10 Single Station 3-piece Can Leak Tester: adopts pressure and water immersion test methods, and can detect one can at a time. This leak tester can measure 3-piece cans of different sizes and shapes.
4. CLT-30 Three Stations 3-piece Cans Leak Tester: adopts pressure and water immersion test methods, and can detect three cans at a time. This leak tester can measure 3-piece cans of different sizes and shapes.
5. CLT-60 Six Stations 3-piece Cans Leak Tester: adopts pressure and water immersion test methods, and can detect six cans at a time. This leak tester can measure 3-piece cans of different sizes and shapes.
6. XL-40 Axial Load Tester for 2 or 3-piece Can: is used to measure the maximum axial load force of 2 or 3-piece can. Apply axial force to the 2 or 3-piece can until the can body is deformed, the tester records this load force.
7. Anti-corrosion 3-piece Can Body Making Machines Line: uses a combination machine of necking, beading, flanging and seaming for cans, y fully spray paint in can body to anti-corrosion, fully automatic.
8. Milk Powder 3-piece Can Body Making Machines Line: is highly automated machinery. The machines line can complete the making of high-quality food 3-piece can body.
9. ME-A3 Printed Tinplate Sheets for 3-piece Can Body: gives the 3-piece can a beautiful appearance, with strong patterns, moisture and corrosion resistance.
Note
•If the products you need are not listed on this website, you can also Contact Us, you maybe get a satisfactory answer.
•If the products performances and parameters required by the customer are beyond the scope of this introduction, we can customize it specially.
•The products performances and parameters may be modified at any time without notice.
•The final performance and parameters of the products are determined by the contract signed by the customer at the time of order.
-------------------------------------------