WL-15 Online Container Fill Level Inspection System

Item No.: YWL-15-4483

The fill level inspection system uses X-ray technology to detect and monitor the fill level of each container on the food production line, is important equipment of testing and inspection.

Product parameters
Product Name:	Online Container Fill Level Inspection System
Model Number:	WL-15
Brand:	S.P.
Minimum Order Quantity:	1 online container fill level inspection system
Price:	The price is determined according to the parameters and quantity of the order.
Supply Ability:	15 online container fill level inspection system per month
Place of Origin:	China

INQUIRY

Description

This fill level inspection system uses X-ray technology to detect and monitor the fill level of each container on the food production line. When the liquid level in the container does not meet the height requirement, the container will be automatically rejected. The fill level inspection system is important equipment of testing and inspection for beverage production.

The WL-15 fill level inspection system is suitable for containers of various materials, such as: PET, metal three-piece cans, metal two-piece cans, opaque plastic containers, paper containers, glass bottles, beer bottles, etc.

Metal cans and bottles detected by WL-15 online container fill level inspection system

Metal cans and bottles detected by WL-15 online container fill level inspection system

Working Principle of the WL-15 Online Container Fill Level Inspection System
The WL-15 filling level inspection system uses X-ray technology to detect the liquid level of each container on the production line without touching the product. When the container passes the probe, the probe emits an X-ray beam to penetrate the container. There are two X-beam receiving sensors on the other side of the container (the upper limit receiving sensor of the liquid level and the lower limit receiving sensor of the liquid level). When over-perfusion, the X-ray beam is blocked by the liquid level, and the X-ray beam reaching the upper limit receiving sensor is less than the normal value, the upper limit receiving sensor sends an "alarm" signal to the data processing center. When the perfusion is insufficient, the X-ray beam is not blocked by the liquid level, and the X-ray beam reaching the lower limit receiving sensor is greater than the normal value, the lower limit receiving sensor will also "notify" the data processing center. Under these circumstances, the data processing center ordered the rejection unit to reject the abnormally filled containers.

Characteristics of the WL-15 Online Container Fill Level Inspection System
◇ Non-contact online inspection
◇ X-ray technology
◇ Both overfilled and underfilled detection
◇ Up to 1,500 containers per minute
◇ Automatically remove defective products
◇ Chinese and English color touch screen operating system

Parameters of the WL-15 Online Container Fill Level Inspection System
• Equipment Name: Online container fill level inspection system
• Equipment model: WL-15
• Main material: stainless steel 304
• Waterproof rating: Ip65
• Conveyor speed (detection speed): ≤ 30 m / min
• Adapt to conveyor belt height: 600mm-1400mm
• Power supply: AC220V/380, three phase, 50Hz/60Hz, 2KW, can be customized according to the customer's local power supply.
• Compressed air required: 0.6Mpa, 800L/min
• Compressed air pipe interface diameter: φ10mm
• Operating temperature: 0°C-45°C
• Working humidity: 10%-80%
• Machine size (length × width × height, mm): 1000 × 700 × 1928

-------------------------------------------
Reference article
Online Food Container Quality Detecting Solution After Sealing
-------------------------------------------
Related Products
If you need other types of products, please click on the blue font below, you can browse another page to see the related introduction.
1. YP-15A Online Non-contact Cans Pressure Tester Detector: is an automatic inspection system that test and monitor the internal pressure of each can on food production line, non-contact, high-speed.
2. YP-15B Online Non-contact Glass Bottle Pressure Tester Detector: is an automatic detection system that can monitor the internal pressure of each gas-containing glass bottle on the food production line, non-contact, high-speed.
3. YP-80A Online Squeeze Flexible Cans Non-destructive Pressure Tester Detector: is an automatic inspection system, which gently squeezes the side wall of each flexible can on the food production line to monitor the internal pressure of the can.
4. Online Squeeze Flexible Bottles Non-destructive Pressure Tester Detector: is an automatic inspection system, which gently squeezes the side wall of each flexible bottle on the food production line to monitor the internal pressure of the bottle.
5. ZK-15A Online Cans Vacuum Tester Detector: can detect and monitor the vacuum degree of each can on the food production line.
6. ZK-15B Online Irregular Cans Vacuum Tester Detector: can detect and monitor the vacuum degree of each irregular can on the food production line.
7. ZK-15C Online Bottles Vacuum Tester Detector: can detect and monitor the vacuum degree of each bottle on the food production line.
8. ZX-30A Online Full Box Cans Vacuum Tester Detector: is equipment for detect and monitor the vacuum condition of cans in a carton box or shrink wrapped.
9. VC-15 Online Cans and Bottles Visual Code Inspection System: is equipment used to monitor the production date code printed on each can or bottle on line.
Note
•If the products you need are not listed on this website, you can also Contact Us, you maybe get a satisfactory answer.
•If the products performances and parameters required by the customer are beyond the scope of this introduction, we can customize it specially.
•The products performances and parameters may be modified at any time without notice.
•The final performance and parameters of the products are determined by the contract signed by the customer at the time of order.
-------------------------------------------